12-100826City of Federal Way
Community &Econ. ev. Services
FILE
33325 8th Ave S
HEAP PECH
Federal Way, WA 98003
BRENNAN HEATING & A/C LLC
Ph: (253) 835-2607 Fax: (253) 835-2609
BRENNAN HEATING & A/C
Project Name: PECH
Project Address: 31749 42ND AVE SW
Mechanical
Permit #: 12 -100826 -00 -ME
Inspection Request Line: (253) 835-3050
Parcel Number: 873198 3050
Project Description: Replace existing gas furnace, like for like***REVISED 2/29/12 TO ADD (1) OUTLET TO
GAS PIPING FOR GAS RANGE***
Owner
ARRlican
Contractor
HEAP PECH
JAIMIE HOW
BRENNAN HEATING & A/C LLC
CHUM SETHA PECH
BRENNAN HEATING & A/C
(GENERAL)
31749 42ND AVE SW
4601 S 134TH PL
BRENNHA971119 (12/29/13)
FEDERAL WAY WA 98023-2122
SEATTLE WA 98168
4601 S 134TH PL
TUKWILA WA 98168
Additional Permit Information
Mechanical Valuation............................................2349 Is this an Online or O.T.C. application? ................. Yes
Mechanical Fixtures'
Furnaces ......................................... 1 Gas Piping ...................................... .r3
PERMIT EXPIRES Monday, August 20, 2012
Permit Issued on Wednesday, February 22, 2012
I hereby certify that the above information is correct and that the construction on the above described property and
the occupancy and the use will be in accordance with the laws, rules and regulations of the State of Washington
and the City of Federal Way. /
�� '
Owner or agent: Date: �! Z
c
CITY OF
Federal Way
THIS CARD IS TO REMAIN ON-SITE
.. construction Inspection Record
INSPECTION REQUESTS: (253) 835-3050
PERMIT #: 12 -100826 -00 -ME Address: 31749 42ND AVE SW
Project: HEAP PECH FEDERAL WAY, WA 98023-2122
Scheduled inspections may be failed if this card is not on-site. DO NOT LOSE THIS CARD. Inspections are listed as close to sequential order as
possible (read left to right, top to bottom). Please- schedule inspections as appropriate. Work must not be covered until it is approved Check with your
inspector if you are unsure about any of the inspections or the inspection sequence. On-going inspections are logged on the back of this card.
Mechanical Rough -in (4165)
0 Gas Piping (4125)
Final - Mechanical (4065)
Approved
Approved to release test /J
Approved
By f,,ZjC Date3 - - Z
By Date �- / - ��
By VefDate 3 .
Rough Electrical Final Electrical Right of Way
Approved Approved Approved
By Date By Date By Date
House address or lot number:
City:
Cond. Floor Area (ft2) _ 1 W
Air Handler in conditioned space? ❑ yes N no
Zip:
Air Handler present during test? [SI yes [] no
Circle Test Method: Leakage to Outside Total Leakage
Maximum duct leakage:
Total duct leakage (air handler installed) - floor area x.,08 = CFM@25 Pa
Total duct leakage (air handler not installed) floor area x .04
-__XICFM025 Pa
Leakage to outdoors - floor area x .06 a !LNCFM@25 Pa
Test Result 3 1 CFM@25Pa 17.5
Ring (circle one) pen 1
2 3
Duct Blaster Location 1 A .1 n/An
Pressure Tap Location n. C _„t
I certify that these duct leakage rates are accurate and were determined using standard duct testing protocol
Company Name: R,nr �^.^ a-
c� Li
q
Technician:
Washington State Energy Code reference: Date:
503.10.2 Sealing. All ducts, air handlers, filter boxes, and building cavities used as ducts shall be sea
Joints and seams shall comply with Section M 1601.3 of the International Residential Code or 603.9 of the
International Mechanical Code. Duct tightness testing shall be conducted to verify that the ducts are
sealed.'A signed affidavit documenting the test results shall be provided to the jurisdiction having authority
by the testing agent. When required by the building official, the test shall be conducted in the ' resence o
department staff. p f