Loading...
14-102131City of Federal Way Community & Econ. Dev. Services 33325 8th Ave S Federal Way, WA 98003 Ph: (253) 835-2607 Fax: (253) 835-2609 Project Name: RITE AID Project Address: 32015 PACIFIC HWY S • Sign Permit #: 14 -102131 -00 -SG Inspection Request Line: (253) 835-3050 Parcel Number: 150050 0110 Project Description: Replace (channel letters) and reface (cabinet portions) of 4 wall signs, hooking back up to existing ,boxes. Replacing 2 exempt signs, including F/S panel change and drive-thru exit directional sign. Ownr Applican Contractor RITE AID CORPORATION SIGNART INC CULBERTSON SIGN SERVICE PO BOX 3165 5757 E CORK ST CULBESS984MU (8/30/14) HARRISBURG PA 17105 KALAMAZOO MI 49048 5209 122ND ST E 1 7.15 TACOMA WA 98446 Wall Sign Information Additional Permit Information Comprehensive Plan Designation ..........................City Center Frame Zoning Designation ................................................ CC -F PERMIT EXPIRES Saturday, November 29, 2014 Permit Issued on Monday, June 2, 2014 I hereby certify that the above information is correct and that the construction on the above described property and the occupancy and the use will be inaccordance with the laws, rules and regulations of the State of Washington �,,2and the City of ederal Way. Owner or agent: ( �� Date: Reg. # Sign Type Illuminated # Sign Faces Sign Face Width (Ft) Sign Face Height (Ft.) Building Elevation Sign A na Cabinet Yes 1 7.15 5.85 North Sign B na Channel Letters Yes 1 17.23 5.25 North Sign C na Channel Letters Yes 1 17.23 5.25 West Sign D na Cabinet Yes 1 10.25 2.00 West Sign E EXEMPT Other No 1 1.50 1.50 East Additional Permit Information Comprehensive Plan Designation ..........................City Center Frame Zoning Designation ................................................ CC -F PERMIT EXPIRES Saturday, November 29, 2014 Permit Issued on Monday, June 2, 2014 I hereby certify that the above information is correct and that the construction on the above described property and the occupancy and the use will be inaccordance with the laws, rules and regulations of the State of Washington �,,2and the City of ederal Way. Owner or agent: ( �� Date: ` THIS CARD IS TO REMAIN ON-SITE CITY OF Federal �� Construction Inspection Record y INSPECTION REQUESTS: (253) 835-3050 PERMIT #: 14 -102131 -00 -SG Address: 32015 PACIFIC HWY S Project: RITE AID CORPORATION FEDERAL WAY, WA 98003 Scheduled inspections may be failed if this card is not on-site. DO NOT LOSE THIS CARD. Inspections are listed as close to sequential order as possible (read left to right, top to bottom). Please schedule inspections as appropriate. Work must not be covered until it is approved. Check with your inspector if you are unsure about any of the inspections or the inspection sequence. On-going inspections are logged on the back of this card. Footings/Setback (4110) Approved Final - Electrical (4055) Final - Sign (4085) 1:1Approved to place concrete Approved El Right of Way By Date By V,6 Date (Of 3 JJq By Date Attachment (4010) Approved BAA ` r Date y I ��Ui�e�" �U �.`_ F1Rough Electrical Approved 1:1Final Electrical El Right of Way Approved Approved By Date By Date By Date 14 CITY OF Federal Way KGv•-i ' -- MAY 0 9 2014 cmOF- W IGNAPERMIT APPLICATION L Y- .- L` S 2n 513 0 �( SITE ADDRESS 32015 S. Pacific Hwy SUITE/UNIT # ASSESSOR'S TAX/PARCEL # 1 5 0 0 5 0- 0 1 1 0 ZONING DESIGNATION CF _TYYPE OF PROJECT (Check all that apply): ❑ NEW ❑ ALTERATION REFACE ❑ EXEMPT V ELECTRICAL (To attach to existing J -box - include on this permit) ❑ ELECTRICAL (New/altered circuit & J -box added - separate permit is required) NUMBER OF SIGNS APPLIED FOR WITH THIS APPLICATION: Wall Mounted: 5 Freestanding: 1 TOTAL ESTIMATED PROJECT COST: $ 16,450 DETAILED PROJECT DESCRIPTION: Reface all the signs BUSINESS NAME ON SIGN: Rote Aid SIGN OWNER: CONTRACTOR: APPLICANT NAME: PRIMARY PHONE Rite Aid Corp ( 717) 761-2633 MAILING ADDRESS (STREET ADDRESS; CITY, STATE, ZIP): FAX NUMBER PO Box 3165 Harrisburg, PA 17105 ( ) - CITY OFF WAY BU S�ENSE NU BER: E-MAIL ADDRESS CITY OF FEDERAL WAY BUSINESS LICENSE NUMBER: EXPIRATION DATE: FAX NUMBER COMPANY NAME APPLICANT NAME OFFICE PHONE Culbertson Signs Aaron Curtis ( 800) 925 - 6011 MAILING ADDRESS (STREET ADDRESS: CITY, STATE, ZIP): CELL PHONE 5209 122nd St E, Tacoma, WA 98446 ( ) - CITY OF FEDERAL WAY BUSINESS LICENSE NUMBER: EXPIRATION DATE: FAX NUMBER 19 -99 -106867 -00 -BL 1 ( 253) 538 - 0778 CONTRACTOR'S REGISTRATION NUMBER: EXPIRATION DATE: E-MAIL ADDRESS CULBESS984MU culbertsonsignservice@comc COMPANY NAME APPLICANT NAME PRIMARY PHONE Si nArt Inc Aaron Curtis () 381 -3012 ADDRESS CITY, STATE, ZIP FAX NUMBER 5757 E. Cork St Kalamazoo MI 49048 ( 269) 381 - 0999 RELATIONSHIP TO PROJECT E-MAIL ADDRESS ❑ Contractor ❑ Tenant Vother Manufacturer/ GCacurtis@signarfinc.corr PROJECT NAME PRIMARYCurtis L. Dyck (7 4 )HG E-MAIL ADDRESS: CONTACT NE 287- 9576 Curtis L Dyck@riteaid. 0 SIGNATURE I certify under penalty of perjury that the information furnished by me is true and correct to the best of my knowledge, and further, that I am 7"zethothe of the above premises to perform the work for which the permit application is made SIGNATURE DATE: 5/2/14 COMMUNITY DEVELOPMENT SERVICES • 33325 8- AVENUE SOUTH • FEDERAL WAY, WA 98003-6325 • 253-835-2607 • FAX: 253-835-2609 A.net TYPE OF PERMANENT FREE STANDING: MONUMENT PEDESTAL POLE TENANT DIRECTORY OTHER OTHER (Describel PERMANENT BUILDING MOUNTED: AWNING 4 CABINET 2 CHANNEL LETTERS TENANT DIRECTORY OTHER (De FREE STANDING SIGNS MOUNTED SIGNS SIGN TYPE SIGN AREA (SQ. FT.) ILLUMINATED? REFACE? TOTAL HEIGHT BASE HEIGHT (FT) REGISTRATION NUMBER: REGISTRATION NUMBER: WIDTH x HEIGHT x # OF FACES NO / INT / EXT YES / NO FT A A 85.25",70.25"x 1 41.56 INT NE 300 = X_ x — B C/L 35.75';?03.75x" 2 = 101.20 B E and N 2520/2862 C Attributes 22.94" 19.37"x 2 =59.98 INT E and N 2520/2862 X_ x — CanopV 124.75"x 24" x 1 = 20.8 INT E C E Traffic 18" x 18" x 1 = 2.25 NO W 2862 LARGEST EXPOSED BUILDING FACE (SQUARE FEET): 3760 x x — STREET FRONTAGE (LINEAR FEET): BUILDING MOUNTED SIGNS BUILDING MOUNTED SIGNS SIGN TYPE SIGN AREA (SQ. FT.) ILLUMINATED? BUILDING ELEVATION EXPOSED BUILDING FACE REGISTRATION NUMBER: REGISTRATION NUMBER: WIDTH x HEIGHT x# OF FACES NO/INT/EXT N S E W S. FT. A Shield 85.25",70.25"x 1 41.56 INT NE 300 = B C/L 35.75';?03.75x" 2 = 101.20 INT E and N 2520/2862 C Attributes 22.94" 19.37"x 2 =59.98 INT E and N 2520/2862 D CanopV 124.75"x 24" x 1 = 20.8 INT E 2862 E Traffic 18" x 18" x 1 = 2.25 NO W 2862 LARGEST EXPOSED BUILDING FACE (SQUARE FEET): 3760 **FOR OFFICE USE ONLY** ZONING DESIGNATION: PROFILE: ❑ HIGH ❑ MEDIUM ❑ LOW ❑ FREEWAY BUILDING MOUNTED SIGNS FREE STANDING SIGN(S) AREA PERMITTED: AREA PROPOSED: LARGEST BUILDING FACADE: NUMBER OF SIGNS ALLOWED: AREA PERMITTED: AREA PROPOSED: STREET FRONTAGE: NUMBER OF SIGNS ALLOWED: LAND USE APPROVAL BY: DATE: STRUCTURAL APPROVAL BY: DATE: REGISTRATION NUMBER: REGISTRATION NUMBER: REGISTRATION NUMBER: REGISTRATION NUMBER: REGISTRATION NUMBER: REGISTRATION NUMBER: Bulletin #102 — January 1, 2011 Page 2 of 4 k:/Handouts/Sign Permit Application SIGN PERMIT APPLICATION CHECKLIST APPLICATIONS WILL NOTBE ACCEPTED AT THE COUNTER UNLESS ALL REQUIRED INFORMATION IS PROVIDED ❑ COMPLETED PERMIT APPLICATION ❑ APPLICATION FEES ❑ TWO (2) COMPLETE SETS OF PLANS (ASSEMBLED AND STAPLED INTO SETS) ❑ MINIMUM PLAN SIZE — 11" X 17" F1 PLANS DRAWN TO SCALE AND SCALE PROVIDED ❑ SITE PLAN: ❑ Scale (1" = 20') ❑ Location of ALL proposed signs, including refaces ❑ North arrow ❑ Each sign alpha labeled consistent with application ❑ Property lines and building footprint i i Location of all existing signs to remain ❑ Location of suite, if multi -tenant ❑ Location of all existing signs to be removed MOUNTEDBUILDING ❑ ELEVATION DRAWINGS ❑ DETAILS ❑ Scale ('/s" = 1') ❑ Scale ❑ Location and size of all signage including: ❑ Sign materials, color and illumination type ❑ Existing signs to be removed t i Actual weight of sign or individual letters [i Existing signs to remain on each fagade ❑ Cross-section showing scaled width of sign: ❑ Proposed signs if canopy or awning, show entire building ❑ Dimensions of each building face or suite fagade including awning/canopy and color scheme ❑ Calculated total building face area ❑ Method of attachment, size/type of ❑ Calculated total sign face area OR connector AND Calculated total area of individual signage ❑ Site-specific installation details (what sign is components (letters, numbers, logos, etc.) attached to in field), placement and ❑ Each proposed sign alpha labeled consistent construction with application ❑ Each proposed sign alpha labeled consistent with application FREE STANDING SIGNS ❑ SITE/ LANDSCAPING PLAN ❑ ELEVATION DRAWINGS (IN ADDITION TO OVERALL SITE PLAN) ❑ Scale ❑ Minimum scale 1" = 20' n Sign materials, color & illumination type ❑ Footprint and dimensions of sign ❑ Sign face/panel/base dimensions ❑ Setbacks from property line(s) a Calculated total sign/panel area ❑ Show point of measurement for location of ❑ Base materials & how harmonious w/building property line(s) using fog -line, sidewalk, 11 Foundation type and/or edge of pavement ❑ Alpha labeling consistent with application ❑ Show location of driveway and street ❑ Footprint and dimensions of landscape area ❑ CROSS-SECTION ❑ Type & location of landscape vegetation ❑ Scale ❑ Calculated landscape area ❑ Edge of landscaping area (minus footprint of sign) 0 Existing & finished grades surrounding sign ❑ DETAILS ❑ Total sign height from average grade 1:1 Foundation/footing information F Wind load calculations (for signs 6' & over) Bulletin #102 —January 1, 2011 Page 3 of 4 k:/Handouts/Sign Permit Application ` CITY OF Di a Federal Way DATE: April 18, 2014 To: Sign Art Inc FROM: Permit Center RE: Application for Sign Permit - Rite Aid We received the referenced permit application by mail and have reviewed it for completeness. Unfortunately, there are numerous items that need to be addressed prior to submitting these materials. Enclosed is a copy of the plans and your application form with the required information highlighted. To avoid additional delays in the permitting process, we encourage you to coordinate submittals in person with a local contact if at all possible. Mailed in projects often take several days, if not weeks to be looked at by staff, especially during this busy time of year. If you have questions or need additional information feel free to contact the Permit Center at 253-835-2607 or permitcenter@cityoffederalway.com. Permit Fee Estimate Worksheet Rite Aid Signage Submittal Fees $296.90 Valuation Information to Use ? Project NEW Commercial or Multifamily? Commercial/MF or Single Family Number of Units ? Proposed Valuation: Calculated Valuation: Mechanical Valuation.- Plumbing aluation:Plumbing Valuation: Valuation to use in Permit Fee Calculations Proposed Project Yes N/A 1 r $16,450.00 $0.00 $0.00 $0.00 16,450.00 Permit Fee Base Amount: $103.50 Permit Fee Additional Increment Amount: $322.50 Mechanical Fee Base Amount: $0.00 Mechanical Fee Additional Increment Amount: $0.00 Plumbing Fee Base Amount: $0.00 Plumbing Fee Additional Increment Amount: $0.00 Permit Fee: $426.00 Plan Review Fee: $276.90 FW Fire Dept. Fee: $0.00 Residential PW Plan Review Fee: $0.00 Mechanical Permit Fee: $0.00 Mechanical Plan Review Fee: $0.00 Plumbing Permit Fee: $0.00 Plumbing Plan Check Fee: $0.00 Automation Fee: $20.00 Digitizing Fee: $0.00 SBCC Surcharge Fee: $0.00 Other Fees: Estimated Permit Fee 3 $722.90 This is an estimate only. City of Federal Way Exact fee amount established at permit submittal. 4/18/2014 May 2, 2014 SignArt Inc. 5757 E. Cork Street Kalamazoo, MI 49048 Lo - 269.381.3012 800.422.3030 FAX269.381.0999269.381.0999 w .signartinc.com City of Federal Way- Community Development Services 33325S.8 th Ave Federal Way, WA 98003-6325 Re: Sign Permit Application Rite Aid Pharmacy #5175 32015 S. Pacific Hwy. Dear Planning Official: Enclosed please find our sign permit application, the check for the process and two (2) sets of drawings (11x17) for the above referenced project location. When you have reviewed the enclosed, please call me at (269) 207-1671 or email me at acurtisgsignartinc.com with the required permit fees or any questions or concerns you may have. Our local installer will pick up the permits when they are ready. Best regards, Aaron Curtis SignArt, Inc 269.216.5827 RECEIVED MAY 0 9 2014 CITY OF FEDERAL WAY CDS L:\ Wiles\RiteAid\05175\01 AC4025693, 2.20.14\Permits\cvr1etter for permitdocx CORRECTION NOTICE: RITE AID 32015 PACIFIC HIGHWAY RE: SIGN PERMIT # 14 -102131 -00 -SG A**A j /Z4 INTERNALLY ILLUMINATED PAN CHANNEL LETTER WITH REMOTED TRANSFORMER 5' 1 in TRIMCAP INTERNAL LOW VOLTAGE L.E.D. ILLUMINATION. PLASTIC FACE ALUMINUM RETURNS AND BACKS --- TYPICAL #10 X 3" PAN -HEAD SCREWS. MIN 4 PER LETTER. REMOTE LOW VOLTAGE POWER SUPPLY GTO WIRE TO TRANSF, LT-1-1 TO J -BOX IN CONDUIT 1/2" CONDUIT THRU WALL DRYVIT WALL RESUBMITTED JUN 0 5 2014 CITY OF FEDERAL WAY CDS Federal Way M Building Division 33325 Eighth Avenue South Federal Way, WA 98003-6325 Phone 253-835-2607 Fax 253-835-2609 CORRECTION NOTICE ADDRESS: 32015 Pacific Hwy S. PERMIT#: 14 -102131 -00 -SG 2012 IBC [A] 107.4 Amended construction documents. Work shall be installed in accordance with the approved construction documents and any changes made during construction that are not in compliance with the approved construction documents shall be resubmitted for approval as an amended set of construction documents Contractor has used a minimum of (4) 3'' pan head screws instead of 3/8 through bolts on approved set of drawings. Contractor shall re -submit for approval OK to sign off attachment if approved by building_ official. IF YOU HAVE QUESTIONS CALL Matt (253) 835 2623 WHEN CORRECTIONS HAVE BEEN MADE, CALL (253) 835-3050 FOR RE -INSPECTION. SEE BACK OF CARD FOR DETAILS. NOTE: ELECTRICAL CORRECTIONS ARE REQUIRED TO BE MADE WITHIN 15 DAYS. 6/3/14 Date Matt Inspector DO NOT REMOVE THIS NOTICE Page 1 of 2 t Rite Aid #5175 — 32015 Pacific Hwy S., Federal Way, WA This is an original unpublished drawing, submitted for your use in connection with a project being planned for you by SignArt. It is not to be reproduced, copied or exhibited in any fashion without written permission of Sign rt. )C 4-2-14 5-1-14TB Approved for: bite rlan bcale: i" = bu-u" Note: All scales are approximate. By: Sign F � Do rn D 0 M ^' n � 70 CO o m� N o RECEIVES J > 0 Q o MAY 0 9 2014 CITY OF FEDERAL W, CDS Lead #AC -40: ©2014 WA,ra! Date: 811 gyp, _ 7-11 5'-10'/4" �ig4 Replacement Face for Illuminated Wall Shield Sign Scale: 3/16" = V-0" Existin�+'(`ace to be removed and replaced with new flat white polycarbonate with #2870 blue and #2283 red pressure sensitive vinyl applied to first surface with copy weeded out to appear white. Existing cabinet to be scuffed, primed and painted GripGard Plus semi- gloss to match SW 6076 Turkish Coffee. Note: Existing sign has 11/2" retainers. 5'-101/4" x 7-11/4" = 41.59 Sq.Ft. 9.4. 7.33/4 ;3'-0 LdVL A D Pharmacy DriveThru Photo Center.,, 5'-93/a" I, 5' 33/a" `Iry 7'-5'/4' 1i.� 1 (face seam) TFace T—(face seam) 18'-61 S/i 6' D� East Side Illuminated Channel Letters/Bullet Signs Scale: 3/16" = 1'-0" 'RITE"�— Existing channel letters to be removed with all penetrations patched and replaced with new flat white polycarbonate faced, U.L. labeled, aluminum channel letters with 5" deep returns and 1" Jewelite painted GripGard Plus semi -gloss to match SW 6076 Turkish Coffee. Insides of letters to be painted with AKZO bright white reflective finish. Letters to be illuminated using white LEDs powered by low voltage power supplies. Bullet Sign — Existing sign face to be removed and replaced with new .080 aluminum face painted GripGard Plus semi -gloss to match #6076 Turkish Coffee. Copy to be precision routed and backed with 1/4" white'push thru' flush acrylic. Existing cabinet to be scuffed, primed and painted GripGard Plus semi -gloss to match SW 6076 Turkish Coffee. Square Footage 'RITE AID' 3'-0" x 17'-23/4' = 51.69 Sq.Ft. Attribute 1'-73/8" x 18'-615/16 = 29.99 Sq.Ft. Total = 81.68 Sq.Ft. Rite Aid #5175 — 32015 Pacific Hwy S., Federal Way, WA 17'-23/a" r51 9' 0" '_7--33/4--- 1 T-33/4" 11 3'-0" A Lff 5AP 8" 1'-73/8' DriveThru Photo Center 5'-93/4" 5'-33/4" I 7'-5'/a" ) (face seam(fa c T—(face seam) 18'-615/tb' Si;C North Side Illuminated Channel Letters/Bullet Signs Scale: 3/16" = 1'-0r' 'RIT D' — Existing channel letters to be removed with all penetrations patched and replaced with new flat white polycarbonate faced, U.L. labeled, aluminum channel letters with 5" deep returns and 1" Jewelite painted GripGard Plus semi -gloss to match SW 6076 Turkish Coffee. Insides of letters to be painted with AKZO bright white reflective finish. Letters to be illuminated using white LEDs powered by low voltage power supplies. Bullet Sign — Existing sign face to be removed and replaced with new .080 aluminum face painted GripGard Plus semi -gloss to match #6076 Turkish Coffee. Copy to be precision routed and backed with 1/4' white'push thru' flush acrylic. Existing cabinet to be scuffed, primed and painted GripGard Plus semi -gloss to match SW 6076 Turkish Coffee. Square Footage 'RITE AID' 3'-0" x 17'-23/4" = 51.69 Sq. Ft. Attribute 1'-73/8" x 18'-615/,6' = 29.99 Sq.Ft. Total = 81.68 Sq.Ft. This is an original unpublished drawing, submitted for your use in connection with a project being planned for you by SignArt. It is not to be reproduced, copied or exhibited in any fashion without written permission of SignArt. JC 4-2-14 5-1-14TB Approved for: By: Lead #AC -4025293 ©2014 WA,ra5175p Date: Illuminated Channel Letter Detail O.040 Aluminum letter sides painted GripGard semi -gloss to match SW 6076 Turkish Coffee. O1" Jewelite trim cap painted to match SW 6076 Turkish Coffee with #8 x 1/2" hex head screws as needed OFlat white polycarbonate faces. OG.E. Tetra MAX LED system. OLow voltage wiring from power supply. OPre -drilled low voltage electrical hole with 3/a" plastic grommet. O1/4' Weep holes at low points of letters with internal light baffle. 8O .050 Aluminum letter back. Letter sides and backs stitched together and continuously siliconed. OBuilding facade; exact construction to be verified. 10 Vertical stud by others. 11 20 Amp toggle disconnect (actual location to be on end of raceway, shown on top for drawing purposes only). 12 4" x 8" x 18" JIC box. 13 Low voltage (12 volts) G.E. #GEPS12-60 LED power supplies (120 volt circuit required). 14 Secondary wiring low voltage connection to LED's with #054007-06128 Scotchlok connectors. 15 Ground wire permanently fixed to power supply box. 16 112' Sealtite connector. 17 UL listed Belden #9409 1 PRI 8 AWG wire. 18 112' Sealtite conduit. 19 #12 THHN electrical primary wiring. White — Neutral Black — Feed Green — Ground Weight of the Signs: R: 13lbs I: 6 lbs T: 10 lbs E: 13 lbs A: 14 lbs I: 6 lbs D: 13 lbs Shield: 18 lbs Attribute: 25 lbs Drive Thru: 15 lbs 20 Letters mounted to facade with 3/8' stainless steel threaded rod, washers and nuts as needed. Exact fastener to vary with different facade/building construction. Note: All penetrations to be sealed with 3M #1000 NS Fire Barrier, water tight, non -slump silicone sealant to meet NEC #300.21, ASTM #E814, UL #1479 & UL #2079 standards. Building dimensions and construction of facade to be verified by sign installer prior to installation of signs. Scale: 3" = V-0" Rite Aid #5175 — 32015 Pacific Hwy S., Federal Way, WA Lead #AC -4025293 This is an original unpublished drawing, submitted for your use in connection with a project being planned for you by SignArt. It is not to be reproduced, copied or exhibited in any fashion without written permission of SignArt. ©2014 WA,ra5175p JC 4-2-14 5-1-14TB Approved for: By: Date: Existing Elevation Scale: 1/8" = 1r-0" Note: All scales are approximate. Rite Aid #5175 — 32015 Pacific Hwy S., Federal Way, WA Lead #AC -4025293 This is an original unpublished drawing, submitted for your use in connection with a project being planned for you by SignArt. It is rot to be reproduced, copied or exhibited in any fashion without written permission of SignArt. ©2014 WA,ra5175p JC 4-2-14 5-1-14TB Approved for: By: Date: Proposed Elevation Scale: 1/8" = 1t-0" Note: All scales are approximate.PO-- 7�E��Yl '5` �+ Zo _ 3oZ�-¢ `� 5{-'A 2 11. VY Rite Aid #5175 — 32015 Pacific Hwy S., Federal Way, WA Lead #AC -4025293 This is an original unpublished drawing, submitted for your use in connection with a project being planned for you by SignArt. It is not to be reproduced, copied or exhibited in any fashion without written permission of SignArt. ©2014 WA,ra5175p )C 4-2-74 5-1-14TB Approved for: By: Date: i 010'!-4/4. " r7q Sign D L Illuminated Single Faced Canopy Sign Scale: 3/8" = 1'-0" i. 2'-0" x 10'-43/4' = 20.79 Sq.Ft. 23/4"E 1'-6" 8'/2' L 4'-8" r:10.. EXIT d�rcc� ONLY i n — Reflective Traffic Control Sin Scale: 3/4" = 1'-0" 5 A minum sign painted acrylic polyurethane to match SW 6076 Turkish Coffee, front and back. Copy/symbol to be reflective white and red Scotchlite. To include four blue #10 x 1/2' S.S. metal screws color matched and Tapcon masonry anchors (as needed) to be used in conjunction with silicone on back of sign. 1'-6" x 1'-6" = 2.25 Sq.Ft. Existing sign cabinet and retainer to be scuffed, primed and painted semi -gloss to match SW 6076 Turkish Coffee. New .100 aluminum panel face painted GripGard Plus semi -gloss to match SW 6076 Turkish Coffee precision routed and backed with flat white polycarbonate with black pressure sensitive vinyl applied to first surface. Note: Relamp sign as needed. Existing Elevation Scale: 1/8" = 1'-0" Note: All scales are approximate. Proposed Elevation A/W_ Scale: 1/8" = 1'-0" Note: All scales are approximate. Rite Aid #5175 — 32015 Pacific Hwy S., Federal Way, WA Lead #AC -4025293 This is an original unpublished drawing, submitted for your use in connection with a project being planned for you by SignArt. It is not to be reproduced, copied or exhibited in any fashion without written permission of SignArt. ©2014 WA,ra5175p JC 4-2-14 5-1-14TB Approved for: By: Date: 10'-8" tZ-3/4"63/4"RITEAIDPHARMACY 3 F —/Replacement Faces for Existing Double Faced Pylon Sin Scale: 1/2' = 1'-0" Les to be removed and replaced with new flat white polycarbonate with applied Calon #2870 blue pressure sensitive vinyl. Faces to be n existing 2" retainer system. Relamp sign and repair electrical as needed. Existing Elevation Scale: 1/8" = 1'-0" Note: All scales are approximate. Proposed Elevation Scale: 1/8" = 1'-0" Note: All scales are approximate. Rite Aid #5175 — 32015 Pacific Hwy S., Federal Way, WA Lead #AC -4025293 This is an original unpublished drawing, submitted for your use in connection with a project being planned for you by SignArt. It is not to be reproduced, copied or exhibited in any fashion without written permission of SignArt. ©2014 WA,ra5175p JC 4-2-14 5-1-14TB Approved for: By: Date: