19-101364 f
Building - Commercial
Community Federal en Permit #:19-101364-00-CO
33325 8th Ave S
Federal Way,WA 98003 Inspection Request Line: (253)835-3050
Ph:(253)835-2607 Fax(253)835-2609
Project Name: FEDERAL WAY CROSSINGS BLDG M
Project Address: 1401 S 348TH ST Parcel Number: 185295 0080
Project Description: REP-Tear off of existing roof down to deck,remove plywood and replace with new 1/2" CDX.
Install new 4' rigid insulation in staggered multiple layers.in stall 60 ml.TPO Roof.
Owner Applicant Contractor Lender
FEDERAL WAY CROSSINGS STANLEY ROOFING COMPANY STANLEY ROOFING COMPANY FEDERAL WAY CROSSINGS
10655 NE 4TH ST SUITE 700 INC INC 10655 NE 4TH ST SUITE 700
BELLEVUE WA 98004 19710 144TH AVE NE 19710 144TH AVE NE BELLEVUE WA 98004
WOODINVILLE WA 98072 WOODINVILLE WA 98072
Census Category: 555-Non-structural roofing permits
Includes: #1 #2 #3 #4
Occupancy Class:
Construction Type:
Occupancy Load:
Floor Area(sq.ft.) 0.00 0.00 0.00 0.00
Additional Permit Information
Mechanical to be Included9 No Number of Stories 1
Is this an Online or O.T.C.application? Yes Permit for Building Shell Only? No
Plumbing to be Included? No Will Certificate of Occupancy be Issued9 No
Total Valuation: 133,255.00
:No Fixtures Associated Permitil..,-
PERMIT EXPIRES Saturday,21 September,2019
Permit Issued on Monday,March 25,2019
I hereby certify that the above information is correct and that the construction on the above described property
and the occupancy and the use will be in accordance with the laws, rules and regulations of the State of
-y� Washington and the City of Federal Way.
,i Owner or agent: L st.1 Date: 3/ "2---s---/tc
City of Federal Way
Certificate of Occupancy
This Certificate issued pursuant to the requirements of Section 111 of the International Building Code or Section
R110 of the International Residential Code is certifying that at the time of issuance,this structure was in
compliance with the various ordinances of the City regulating building construction or use.This certificate is valid
ONLY when endorsed by City staff.
Tenant Name: FEDERAL WAY CROSSINGS BLDG M Permit# 19-101364-00-CO
Address: 1401 S 348TH ST
Includes: #1 #2 #3 #4
Occupancy Class:
Construction Type:
Occupancy Load: 0.00 0.00 0.00 0.00
Floor Area(sq.ft.) 0.00 0.00 0.00 0.00
Owner Name: FEDERAL WAY CROSSINGS
Owner Address: 10655 NE 4TH ST SUITE 700
BELLEVUE WA 98004
Building Official Date
The priority focus in the review and inspection made by the City prior to issuance of this Certificate was on those matters which
experience has shown most severely affect the health and safety of the general public. Although the City has made as complete
a review and inspection as is reasonably possible(within budgetary time and personnel limitations), the City neither guarantees
nor warrants to the owner/occupant or to any other person that this Certificate evidences strict compliance with each and every
ordinance or regulation of the City or the State of Washington affecting the construction or use of said structure or the land upon
which it is situated. Such compliance is the responsibility of the owner and/or occupant of the premises.
PROPOSI - EIVJ
STANLEY ROOFING CO., INC.
19710 144th Avenue NE Page 1
of. 2 5 2019
WOODINVILLE, WA 98072
ST-AN-LR-3755T CITY OF FEDERAL WAY
COMMUNITY DEVELOPMENT
(425) 454-3929 (425) 483-6666
Fax (425) 483-6660 PHONE DATE
TO: Pacific Asset Advisors, Inc 425-990-6200 3/5/2019
14205 SE 36th Street, Suite 215 JOB NAME/LOCATION
Bellevue, WA 98006 MECHANICALLY FASTENED
Federal way Crossing
Attention: Betsy O'Connor Building M Starbucks
Federal Way WA 98003
JOB NUMBER JOB PHONE
We hereby submit specifications and estimates for:
MECHANICALLY FASTENED 60 MIL GREY SINGLE-PLY TPO SINGLE-PLY ROOFING SYSTEM
SCOPE AND SPECIFICATIONS
BASE PROPOSAL: MECHANICALLY FASTEN 4" OF RIGID INSULATION & 60 MIL TPO ROOFING SYSTEM
*Remove and dispose of the single-ply roofing system, remove the existing wood decking (parapet wall
plywood will remain), remove interior loose laid batt insulation setting on an existing interior vapor
barrier attached to the joices, the existing interior vapor barrier will be removed by others, remove
the existing sheetmetal coping and scuppers (the existing collector heads and downspouts will remain)
*Install new 1/2" CDX plywood decking
*Install self adhered vapor barrier to the plywood deck (not on parapet walls)
*Mechanically fasten 4" of rigid polyisocyurante insulation in staggered multiple layers
*Mechanically fasten 60 mil grey TPO roofing system per manufacturer's specifications
*Install walk pad at the hatch and on one side of the HVAC units (service side only)
*Fabricate and install new 24 gauge TPO clad metal scuppers
*Fabricate and install new 24 gauge factory prefinished sheetmetal coping (continuous clip, standing
seam joints, standard colors only)
*Manufacturer will provide a 20 Year No Dollar Limit Warranty (not prorated, transferable to new ownership)
BASE PROPOSAL
TOTAL MATERIAL AND LABOR: $133,255.00 + City of Federal Way Building Permit & Washington State Sales Tax
UNIT PRICING
*Install new HVAC curb adaptors as needed
*Raise Refrigeration units
*Disconnect - reconnect HVAC units units
ADD TO THE BASE CONTRACT: $13,200.00 + Washington State Sales Tax
We Propose hereby to furnish material and labor—complete in accordance with the above specifications,for the sum of:
Contd dollars($ Cont'd ).
Payment to be made as follows:
MONTHLY PROGRESS, 100% UPON COMPLETION
All material is guaranteed to be as specified All work to be completed in a professional
manner according to standard practices.Any alteration or deviation from above specifica- Authonzed
tions involving extra costs will be executed only upon written orders,and will become an Signature kA.71 -t-011
extra charge over and above the estimate.All agreements contingent upon strikes,accidents
or delays beyond our control.Owner to carry fire,tomado,and other necessary insurance. Note:This proposal may be
Our workers are fully covered by Worker's Compensation insurance. withdrawn by us if not accepted within 20 days.
Acceptance of Proposal—The above prices, specifications and
conditions are satisfactory and are hereby accepted.You are authorized to do the work Signature
as specified.Payment will be made as outlined above.
Signature
Date of Acceptance: --
PJ' OPOSAL 282
STANLEY ROOFING CO., INC.
Page 2of2
19710 144th Avenue NE
WOODINVILLE, WA 98072
ST-AN-LR-3755T
(425) 454-3929 (425) 483-6666
Fax (425) 483-6660
PHONE DATE
To:Pacific Asset Advisors, Inc 425-990-6200 /5/2019
14205 SE 36th Street, Suite 215 JOB NAME/LOCATION
Bellevue, WA 98006 MECHANICALLY FASTENED
?ederal Way Crossing
Attention: Betsy O'Connor Building M Starbucks
?ederal Way WA 98003
JOB NUMBER JOB PHONE
We hereby submit specifications and estimates for:
PLEASE NOTE:
>DURING THE ROOFING PROCESS THERE WILL BE NOISE
>The proposal is based on building permit approval of the listed scope of work by the City of Federal Way.
>Stanley Roof are not roofing consultants, water proofing or roof design experts. THE SCOPE AND ROOF DESIGN
IS COMMON IN THE INDUSTRY. WE SUGGEST THE SCOPE BE REVIEWED BY A ROOF DESIGN EXPERT AND THE ROOFING
MANUFACTURER PRIOR TO NEW ROOF INSTALLATION. Stanley Roofing will not be financialy responsible for design
problems or specification changes.
>The proposal is based on the manufacturer's approval of the scope of work to qualify for the manufacturer
20 Year NDL Warranty for this project.
>Raising the HVAC units will not cause damage. If there are HVAC equipment problems after roofing, it would
be coincidental. Stanley Roofing will not be financialy responsible for repairs or replacement of
mechanical units.
>The proposal is based an access in the parking lot at the south end of the building (prior to business
opening) .
>If it goes to litigation the prevailing party will receive attorney fees.
>Unpaid balance will charged 1 percent interest.
EXCLUSIONS: Electrical - gas or HVAC connects - disconnect or curb adapters, interior duct work extensions,
night work, structural repairs, interior protection or damage, loss of business, installing or removal of a
visqueen diaper under the interior roof deck / ceiling, not responsible if the interior vapor barrier falls
down during roofing, nail pops in ceiling or walls, asbestos or mold testing - removal or abatement,
insulation not listed, tapered insulation or crickets, HVAC repair or replacement, sheetmetal not listed,
custom sheetmetal colors, work at night, bonds, permits, Washington State Sales Tax
We Propose hereby to furnish material and tabor—complete in accordance with the above specifications,for the sum of:
One Hundred Thirty Three Thousand Two Hundred Fifty Five and 00/100 Dollars dollars($ 133,255.00
Payment to be made as follows:
MONTHLY PROGRESS, 100% UPON COMPLETION
All material is guaranteed to be as specified All work to be completed in a professional
manner according to standard practices.Any alteration or deviation from above specifica- Authorized %
tions involving extra costs will be executed only upon written orders,and will become an Signature � J has 1 Ate
extra charge over and above the estimate.All agreements contingent upon stnkes,accidents
or delays beyond our control.Owner to carry fire,tornado,and other necessary insurance. Note:This proposal may be
Our workers are fully covered by Worker's Compensation insurance. withdrawn by us if not accepted within 20 days.
Acceptance of Proposal—The above prices, specifications and
conditions are satisfactory and are hereby accepted.You are authorized to do the work Signature
as specified.Payment will be made as outlined above.
Signature
Date of Acceptance:
-- - -S 344th St - Legend .
VICINTY MAP Building M (Starbucks) i` ��, {_
°`! - 0 e — 1401 S 348th St
Write a description for your map. ,` `
. „ ti - - .-• 44/
4,• 441
• A . . . . . . . . , . , . . .
•
lir- ��•.� I
__:___ I ...
!.W u
IlliM MIMI I * -MN ,
, 1•1111111111111.111i WIN/1 .E.I.
Immo
-' ! o ,
j / fly co i�°c
•
..1Y•Li il' 't
348th St cel � _
ti
° ` 3 rm.- 1414> 01 ._S 348t*h. St
. ,,
St
i
3
HY1ebOy ! ,* . a ,
, 1111111 • . ..,,. , nr:iti', .- ar., -:11.1,t,,,.. 1 -0I '--- • .
4'.ia i.,,00l1 j , - S 352nd St-- - —
Abu: 1' . . Ilii _ ;
//i
GoosIe�earth . . - _ - : N
201f3 Google •_---_ w n� _�4 ;' -St �'\. ^'' • I 1000 ft ,
, ! c -- 1 tf "_„.....
mmunimmina
IBuilding M (Starbucks) �, _ Legend
Write a description for your map. _ "` ' `' �--�__ 1401 S 348th St
i
__ / +,. '\ 11, _ •aim-_. r.- .,,
,- -% f ''• �
e r t my ► 'ti•• ► . .rte
- v ,''
11.0 '' 1409 S 348th St
r< a
i• :I* 1
I.
alle
ihtt. . 4
ce.
i'- ► - cos
,i
.... i
isr Alits _____ .
... 11.116 Ilk' r
qh., . , _ • -.,
_4..4
N.
1 It
s
Ilk f
K.
Y
it
,\ a ..
r
•
14A
. oogIe earth N
.2018 Goole ,- 60 ft
tir4 1
JMTPO - 60m11
Johns Manville Thermoplastic Polyolefin Membrane
Meets or exceeds the requirements of ASTM D 6878
Component
Features and Components M
Thickness Over Scrim:Optimized and tested on a continual basis Membrane
with a state-of-the-art thickness gauge to verify that the thickness single Ply
by our customers is incorporated into the sheet. . r.
One of the Widest Melt Windows:Promotes better welds over a
wider variety of speeds and temperatures,and leads to a softer, .,
more flexible and workable sheet.
Reinforced fabric scrim layer and top-ply thickness:Lends to
durable physical properties including:
• Long-term weathering,UV resistance and heat-aging properties
• High breaking and tearing strength Colors
Optimized TPO formulation:delivers high-performance ozone Grey* White Tan*
resistance,cool roof reflectivity and overall weather resistance. *Grey and Tan lead times are subjectto availability and may require
an upcharge for smaller projects.
System Com pati b i l ity This product may be used as a component in the following systems.Please reference product application for specific installation methods and information.
s `ff TPO
=
i ,' AD
S Do not use with Multi-Ply systems in Compatible with the selected Single Ply systems above
Key: HA = Hot Applied CA = Cold Applied HW = Heat Weldable SA = Self Adhered MF = Mechanically Fastened AD = Adhered BA = Ballasted
Energy and the Environment Installation/Application
Standard Reflectivity Emissivity
& it
White Initial 0.77 0.87
3 Yr.Aged 0.70 0.86 41‘.
CRRC® Tan Initial 0.67 0.87 %,
3 Yr.Aged 0.62 0.90 Adhered Mechanically Hot Air Weld
Gray Initial 0.35 0.87 Fastened
3Yr.Aged 0.34 0.90 Refer to JM TPO application guides and detail drawings
White Pass 0.77 0.87 for instructions.
CA Title 24 Tan Pass SRI=75
3 Yr.Aged Packaging and Dimensions
White Initial 0.77 0.87
ENERGY 3 Yr.Aged 0.70 / A Roll Widths 5' 6' 8' 10' 12'
STAR® Tan Initial 0.67 0.87 (1.52 m) (1.83 m) (2.44 m) (3.05 m) (3.66 m)
3 Yr.Aged 0.62 7 A Roll Lengths 100'(30.48 m)
White Initial 95 Roll Coverage 500ft2 600W 800ft21000ft21200ft'
3 Yr.Aged 85 (46.45 m2) (55.74 m) (74.32 m2) (92.90 m2) (111.5 m
LEED® Tan Initial 81 Rolls per Pallet 8
(SRI) 3Yr.Aged 75 13841b 1680lb 22001b 27601b 32401b
Gray Initial 39 Pallet Weight (627.8 kg) (762.0 kg) (997.9 kg) (1251.9 kg) (1469.6 kg)
3Yr.Aged 37 Pallets per Truck* 28-32 22-26 18-20 12-16 12-14
Recycled Post-consumer 0%
Content Post-industrial 5% Producing Location Scottsboro,AL
The LEED®Solar Reflectance Index(SRI)is calculated per ASTM E1980. *Assumes 48'flatbed truck and does not reflect pallets of accessories or impact of mixed sizes.
Peak Advantage®Guarantee Information
Product Guarantee Term
JM TPO 60 mil 5,10,15,or 20 years
Codes and Approvals
c''‘'pSSIFjFo ® rnnannoecourrrr Refer to the Safety Data Sheet and product label prior to using this product.
The Safety Data Sheet is available by calling(800)922-5922 or on the Web at
C ® U$ Miami-Dade C,,nty www.jm.com/roofing.
APPROVED Product Control Approved RS-8633 9-18(Replaces 6-18)
takITAT
JMTPO 60 �iil
Johns Manville Thermoplastic Polyolefin Membrane
Meets or exceeds the requirements of ASTM D 6878
Tested Physical Properties
ASTM Standard for JM TPO—60 mil
Physical Properties Test Method ASTM D 6878(Min.) MD* XMD**
Breaking Strength,min,Ibf(N) D 751 220(976) 411(1,828) 388(1,726)
s, Elongation at Break,min% D 751 15 27 27
6, Tearing Strength,min,lbf(N) D 751 45(200) 92(409) 178(792)
Factory Seam Strength,min,Ibf(N) D 751 66(290) 112(498)
Thickness,min,in. D 751 +/-10%from Nominal 0.060(Nominal)
z. Thickness Over Scrim,min,in.(mm) D 7635 0.015 0.027(0.686)
o, Water Absorption,max,% D 471 3.0 0.11
C
Brittleness Point,max,-40°F D 2137 No Cracks Pass
Ozone Resistance D1149 No Cracks Pass
Properties after Heat Aging @ 240°F D 573 Pass/Fail Pass
Breaking Strength,%(after aging) D 751 90 >90 >90
a€ Elongation,%(after aging) D 751 90 >90 >90
ti
d Tearing Strength,%(after aging) D 751 60 >60 >60
a.
Weight Change,max,%(after aging) D 751 ±1.0 0.19
Linear Dimensional Change,max,%(after 6 hrs @ 158°F) D 1204 ±1.0 <0.1
Accelerated Weathering,min G 151&G 155 10,08D kj/mz-nm @ 340 nm >20,160 kj/m2
t @ (4,000 hrs @ 0.70 W) (>8,000 hrs)
g a Cracking(@ 7x magnification) G 155 No Cracks Pass
*MD=Machine Direction
**XMD=Cross-Machine Direction
Note:All data represents tested values.
Supplemental Testing
ASTM Standard for JM TPO—60 mil
Physical Properties Test Method ASTM D 6878(Min.) Result
Dynamic Puncture D 5635 N/A Pass @ 25 Joules
Static Puncture D 5602 N/A Pass @ 44 lb(20 kg)
Impact Resistance of Bituminous Roofing Systems D 3746 N/A Pass-minor indentations
C 1549 N/A 78%
Reflectance
E 903 N/A 80%
C 1371 N/A 0.87
Emittance
E 408 N/A 0.96
SRI E 1980 N/A 95
Resistance of Synthetic Polymer Material to Fungi G 21 N/A 0 rating
Puncture Resistance(FTMS 101C,Method 2031) N/A N/A 371 lb(168 kg)
Moisture Vapor Transmission E 96 N/A 0 g/m2 per 24 hours
Hydrostatic Resistance,Mullen D 751 N/A 474 PSI(3268 kPa)
Standard Test Method for Air Permeance of BuildingMaterials E 2178 N/A Pass @<0.0005 Llls mZ)
(Pass @<0.0001 CFM/ftz)
Refer to the Safety Data Sheet and product label prior to using this product.
The Safety Data Sheet is available by calling(800)922-5922 or on the Web at
vwvw.jm.corn/roofing. RS-8633 9-18(Replaces 6-18)
Flat & TaTapered ValuTheri M
NIT,
Johns Manville Polyisocyanurate Roof Insulation
Meets the requirements of ASTM C 1289,Type II,Class 1
Grade 2(20 psi) Component
r- .
•ValuTherm/Tapered ValuTherm Flat f u N as— /t y
Grade 3(25 psi) (; , Insulation
Muld-Ply
•ValuTherm 25 PSI/Tapered ValuTherm 25 PSI `�� � V- = single PN
.,
Features �� --�� � =' Type
Glass-Reinforced Facers: Provide rigidity and protection to the �• �' j/ HT
foam core and are compatible with BUR, modified bitumen and HighTherrnal
single plymembranes stems. Glass-Reinforced, �.� 1 ---
9 Y Facers 4. S s �/��`S` TP
Closed Cell Polyisocyanurate Foam Core: Provides high R-value v�� V /� v� ; Tapered
per inch in built-up,modified bitumen,metal roof and single ply roof �� ���. _ C' r
systems,and approved for direct application to steel decks. -�' 0:0 hsl
� 4
Tapered �.\ _ ,�'�Closed cell
Polyisocyanurate
Foam Core
System Compatibility This product may be used as a component in the following systems.Please reference product application for specific installation methods and information.
>. BUR APP I SBS ETPO PVC Eit*
a
HA CA �, AD ...
a Compatible with the selected Multi-Ply systems above rn Compatible with all Single Ply systems
Key: HA = Hot Applied CA = Cold Applied HW = Heat Weldable SA = Self Adhered MF = Mechanically Fastened AD = Adhered BA = Ballasted
Energy and the Environment Installation/Application
LEED° Recycled Content Varies with thickness,see Product DataraillA
and Packaging table on next page. \H _Produced with a pentane blowing agent with zero ozone depletion 0 Tand virtually no global warming potential. r...
Hot Asphalt Urethane Mechanically Loose Laid
Adhesive Fastened
Refer to the application instructions guidelines for proper utilization
Systems of this product.
Not eligible for Peak Advantage Guarantees Flute Span:
Width of Rib Opening: Up to 25/8" Up to 33/8' Up to 43/8'
(6.67 cm) 18.57 cm) (11.11 cm)
Insulation Thickness(min): 1.0"(2.54 cm) 1.2"(3.05 cm) 1.3"(3.30 cm)
�J`Q 951 l
44110/0. nlAwcv,oE c«xrry PIM Packaging and Dimensions
C ® U S Miami-Dade county AQualityMane.
if.,CertifedUTR-volae 4'x 4' 4'x 8'
APPROVE. Product Control Approved Rat Sizes'
(1.22mx1.22m) (1.22mx2.44m)
• FM°Standards 4450/4470 Approvals(refer to FM RoofNav`") 4'x 4'
Tapered Size'
• UL®Standard 790,263 and 1256(refer to UL Roofing Materials (1.22 m x 1.22 m)
system directory) Producing Locations Bremen,IN Cornwall,ONT Fernley,NV
Hazleton,PA Jacksonville,FL
• Meets the requirements of CAN/ULC S704,Type 2&3,Class 3 Stocking Locations' Grand Prairie,TX Southgate,CA Tracy,CA
• California Code of Regulations,Title 24,Insulation Quality 1.For available thicknesses,see Product Data and Packaging table on page 2 of this data
Standard License 41-1341 sheet Other sizes available by special request some sizes are not stocked and special
•Third-party certification with the PIMA Quality Mark'for order with minimum order quantities.Contact your JM Sales Representative for details.
2.Tapered ValuTherm and Tapered ValuTherm 25 PSI are available in thicknesses of 12"to 4".
Long-Term Thermal Resistance(LTTR)values Available profiles are shown on page 3 of this data sheet In some regions extended panels
are also available.
Refer to the Safe for Use instructions and product label prior to using this product. 3.Not all sizes,thicknesses,and products are stocked at all locations,please call Customer
The Safe for Use instructions are available by calling(800)922-5922 or on the Web at Service at 1-877-766-3295.
vvww.jm.com/roofing.
Note:Technical information on this data sheet is intended to be used as a general
guideline only and is subject to change without notice. Contact your JM Sales
Representative for further details. RS-5174 2-18(Replaces 5-16)
N741
JMTPOUALKPAD.
Johns Manville
Features and Components Component
Use: Provides a safe,stable and maintenance-free walkway Accessory
for quick and easy access to rooftop equipment in
Single Ply
high traffic areas.
Type
Material: 150 mil(3.81 mm)thick,textured non-reinforced TPO PT
(thermoplastic polyolefin). .
Protection
•
Color Grey
System Compatibility This product may be used as a component in the following systems.Please reference product application for specific installation methods and information.
TPO
Do not use in Multi-Ply systems Compatible with the selected Single Ply systems above
Key: HA = Hot Applied CA = Cold Applied HW= Heat Weldable SA= Self Adhered MF= Mechanically Fastened FA= Fully Adhered BA= Ballasted
Energy and Environment Installation/Application
LEED® Recycled Content Post-consumer:0% Post-industrial:50%
Physical Properties 121
Property JMTPOWalkpads Fully Adhered Hot Air Weld
Weight per Unit 0.46 lb/ft'(2.27 kg/m2) When installing JM TPO Walkpads be sure to:
• Achieve full weld around perimeter of the material.
Peak Advantage®Guarantee Information • Install textured side up.
Systems • Minimize installing over seams and membrane splices
Approved for use in any JM Peak Advantage Guarantee System whenever possible.
• On mechanically fastened systems,avoid installing over the disc.
• Refer to JM TPO applicator guides or detail drawings for instructions.
Packaging and Dimensions
Roll Size 30"x 50'(76.2 cm x 15.24 m)
Thickness 0.150"(3.81 mm)
Rolls per Container 1
Coverage/Container 125 ftz(11.61 m2)(gross)
Weight per Roll 58 lb(26.3 kg)
Rolls per Pallet 16
Storage
Storage Conditions Store indoors,out of direct sunlight,and keep
clean and dry prior to application.
Refer to the safe use instruction and product label prior to using this product.
The safe use instruction is available on the Web at www.im.com/roofing. RS-8631 12-14(Replaces 4-14)
t741
JMVAPOR BARRIER SA'
Johns Manville Polyethylene-Reinforced, Self-Adhering SBS Vapor Barrier
Features and Components Component
Tri-Laminate M
Tri-laminate woven polyethylene,nonslip,UV-protected top Woven Polyethylene Membrane
surface: Provides temporary weather protection for 90 days.
Provides high tensile strength andpuncture resistance. SRS/Asphalt Multi-Ply
g g waterproofing
Type
Self-sealing,high-quality SBS rubber and asphalt blend: PTProvides low air and vapor permeability.
Protection
Silicone release film:Allows for ease of self-adhering installation.
Silicone Release Film
LiiiiJ
System Compatibility This product maybe used as a component in the following systems.Please reference product application for specific installation methods and information.
- BUR I APP I SBS d TPO I PVC EPDM
m Mil CA CA HW HA** CA HW SA 2' FA MF FA MF FA BA
2 Compatible with all Multi-Ply systems* i7i Compatible with all Single Ply systems*
Key: HA= Hot Applied CA = Cold Applied HW= Heat Weldable SA= Self Adhered MF= Mechanically Fastened FA = Fully Adhered BA = Ballasted
*This product is compatible with all systems when used as a vapor barrier.
**Do not apply hot asphalt to this product
Energy and the Environment Installation/Application
Pre-Consumer Recycled Content 0%
Post-Consumer Recycled Content 0% ..ttll
Peak Advantage®Guarantee Information Self-Adhered
Systems Guarantee Term •This product is not suitable for hot asphalt applicationto the top surface
When used as a vapor barrier in most 10,15 or 20 years •Can be installed on plywood,gypsum or concrete board as well as
JM systems.* asphalt,metal or concrete
*Contact JM Technical Services for specific system requirements or guarantee terms. •All substrates must be primed prior to installation
Codes and Approvals •Minimum application temperature is 14°F(-10°C)
ID
„ssip,e. •Ideal for low-slope applications up to 3"per foot(7.5 cm/m)or 14°
® OUNTY
APPROVEoD •Side laps are 3"(7.62 cm);end laps are 6"(15.24 cm)
C US Miami-Dade County
APPROVED Product Control Approved *Refer to Vapor Barrier Installation Instructions for
application information
Packaging and Dimensions
Roll Coverage* 468 ft2(43.5 m2)
Roll Length 134 ft(40.8 m)
Roll Width 45 in(1.1 m)
Roll Weight 80 lb(35.8 kg)
Rolls per Pallet 25
Pallet Weight 2,050 lb(930 kg)
Refer to the Safety Data Sheet and product label prior to using this product. Pallets per Truck** 26
The Safety Data Sheet is available by calling(800)922-5922 or on the Web at *Assumes a4.side lap''Assumes 48'flatbed truck.
vwvw.jm.com/roofing. RS-2075 10-18(Replaces 9-18)
THIS CARD IS TO REMAIN ON-SITE
•
Construction Inspection Record
�� y INSPECTION REQUESTS:(253)835-3050
PERMIT#: 19 101364 00" Address: 1401 S 348T11 ST
Project: FEDERAL WAY CROSSINGS FEDERAL WAY WA 98003-6882
Scheduled inspections may be failed if this card is not on-site. DO NOT LOSE THIS CARD. Inspections are listed as close to sequential order as possible
(read leR to right,top to bottom). Please schedule inspections as appropriate. Work must not be covered until it is approved. Check with your inspector if
you are unsure about any of the inspections or the inspection sequence. On-going inspections are logged on the back of this card.
El Roof Sheathing(4220) El Final-Building(4050)
Approved to install roofi g Approved
By :tt Date 1 15 et B314`LS Date 7 4 1?
403f
Rough Electrical 0 Final Electrical Right of Way
Approved Approved Approved
By Date By Date By Date
N
,.......4.... RECEIVEDPERMIT APPLICATION
CITY OF
Federal Way MAR 2 5PERMIT CENTER+33325 8th Avenue South+ Federal Way,WA 98003-6325
20W-835-2607 + FAX 253-835-2609 +permitcenter@cityoffederalway.com
i CI OF ED�EWAY.
PERMIT NUMBER 6/ _ (1 �D'V OP( L-I TARGET DATE '�` �'t
SITE ADDRESS SUITE/UNIT#
///) 1 5 3/71,g74 S-1-- N/0/ f e ci ek./ oeoe, a,q, `s,0.63
PROJECT VALUATION ZONING ASSESSOR'S TAX/PARCEL#
$ / 3312..1-5, 00 _ — — —
TYPE OF PERMIT ❑ BUILDING ❑ PLUMBING 0 MECHANICAL 0 DEMOLITION 0 ENGINEERING
,f 0 FIRE PREVENTION
NAME OF PROJECT red 'ct l L✓I)el y� (.°S„1 / �, �j -- 1 ,�1�i,�."'li - ,/1 1` C*
72 c,,- 0�� �.['1.P7,-» f�v�r/bam, 7`-, 'a & Re,-",odC .1
PROJECT DESCRIPTION
Detailed description of work to C ,C d,_(147 ! / i 4J°ere li n i 7;: <1 L ) 4 iQ c4..)� /7 C c
be included on this permit only l� / ��
/._)X Ab GCloll,).. ",rl C�i // h uJ //510/ /,suA..ti.,z
_ .._ .S7 J 55-e.,-&,1 i itc/c ./ p 5, ..7',.�r Vii' 6 -)rv,, I. Ti'O r__acf
NAME PRIMARY PHONE
/It C -C,c A-Ci C.-1.,/o/v,y,01- y =51 a--6L 6 D
PROPERTY OWNER MAILING ADDRESS E-MAIL
/`7(2-cs" c E., 3 d 7T .--C�f 4•C/. :* a i r
CITY STATE ZIP
- fi�/4 1.),-,G t�J 4- 1t-ao e
NAME � PHONE
4 /rf//57 i9 /12 12.1 1-/S3-4(O ed
MAILING ADDRESS
E-MAIL
CONTRACTOR /9 7J 0 ^ /- /4-/R4,#e G• 041 / ,5 S On �r
TY STATE ZIP FAX C/21
,A / y('p6 ,� /,fi ✓7
�� Od>4v../% Cf)/1a72, V
WA STATE CONTRACTOR'S LICENSE# EXPIRATION DATE FEDERAL WAY BUSINESS LICENSE#
$ 4./V4/P 37..5'x`7 _
NAME / / PRIMARY/ PHONE
P/7i�! /fi, e,-)7/cJdn ) 6b-73 0--CIS d
APPLICANT MAILING ADDRESS E-MAIL
/T>ia -,/Sly/1 ,//- A4...t
CITY / STATE. ZIP �+/� FAX
(Nye(it rt tJ,y/r �l ,2t 2
' I�'NAME // PRIMARY PHONE
PROJECT CONTACT •131
(The individual to receive and MAILING ADDRESS E-MAIL
respond to all correspondence
concerning this application) CITY STATE ZIP FAX
NAME
PROJECT FINANCING II OWNER-FINANCED
When value is$5,000 or more MAILING ADDRESS,CITY,STATE,ZIP PHONE
(RCW 19.27.095) A/t r'", G O 1 Z o v
I certify under penalty of perjury that I am the property owner or authorized agent of the property owner.I certify that to the best
of my knowledge, the information submitted in support of this permit application is true and correct.I certify that I will comply with
all applicable City of Federal Way regulations pertaining to the work authorized by the issuance of a permit.I understand that the
issuance of this permit does not remove the owner's responsibility for compliance with local, state, or federal laws regulating
construction or environmental laws.
I further agree to hold harmless the City of Federal Way as to any claim(including costs,expenses,and attorneys'fees incurred in
the investigation and defense of such claim),which may be made by any person, including the undersigned,and filed against the city,
but only where such claim arises out of the reliance of the city, including its officers and employees, upon the accuracy of the
information supplied to the city as a part of this application.apli /
SIGNATURE: _�/L o Jlll�s,a.K/ DATE 3/�-� / i cf
PRINT NAME: 7;;77 f7 .4 /e�/ JJJ/
Bulletin#100-January 29,2016 Page 1 of 2 k:\Handouts\Permit Application
VALUE OF MECHANICAL WORK
MECHANICAL PERMIT $
Indicate how many of each type of fixture to be installed or relocated as part of thisproject.Do not include existing fixtures to remain.
AIR HANDLING UNITS FANS GAS PIPE OUTLETS OTHER(Describe)
AIR CONDITIONER FIREPLACE INSERTS HOODS(commorciai)
BOILERS FURNACES HOT WATER TANKS(cos)
COMPRESSORS GAS LOG SETS REFRIGERATION SYST
DUCTING GAS PIPING WOODSTOVES
VALUE OF PLUMBING WORK
PLUMBING PERMIT $
Indicate how many of each type of fixture to be installed or relocated as part of this project.Do not include existing fixtures to remain.
BATHTUBS(or Tub/Shower Combo) LAVS(Hand Sinks( TOILETS WATER PIPING
DISHWASHERS RAINWATER SYSTEMS URINALS OTHER(Describe)
DRAINS SHOWERS VACUUM BREAKERS
DRINKING FOUNTAINS SINKS(Kitchen/Utility) WATER HEATERS(Electric)
HOSE BIBBS SUMPS WASHING MACHINES TOTAL FIXTURES
GENERAL INFORMATION
CRITICAL AREAS ON PROPERTY? WATER PURVEYOR SEWER PURVEYOR VALUE OF EXISTING IMPROVEMENTS
EXISTING/PREVIOUS USE LOT SIZE(In Square Feet) EXISTING FIRE SPRINKLER SYSTEM? PROPOSED FIRE SUPPRESSION SYSTEM?
❑ Yes ❑ No ❑ Yes ❑ No
RESIDENTIAL - NEW OR ADDITION
AREA DESCRIPTION(in square feet) EXISTING PROPOSED TOTAL FOR OFFICE USE
BASEMENT
FIRST FLOOR(or Mobile Home)
SECOND FLOOR
COVERED ENTRY
DECK
GARAGE ❑ CARPORT ❑
OTHER(describe)
EXISTING PROPOSED TOTAL
Area Totals
**NEW HOMES ONLY'"
ESTIMATED SELLING PRICE$ _ # OF BEDROOMS
COMMERCIAL—NEW/ADDITION
AREA DESCRIPTION Area in Occupancy Group(s) Construction #of Additional Information
Square FeetType Stories
N(RAMI DIS0
ADDITION
COMMERCIAL—REMODEL/TENANT IMPROVEMENTS
AREA DESCRIPTION
Area m Occupancy Group(s) Construction of Additional Information
Square Feet Type Stories
TOTAL 4 - -
TENANT AREA ONLY
PREATECT AREA ONLY
Bulletin#100—January 29,2016 Page 2 of 2 k:\Handouts\Permit Application